|
All Golf Balls Are Not The Same |
Some people think that all golf balls are the same, they couldn’t be more wrong. If you don’t play with a golf ball that suits your swing, then you may not be getting the most out of your game. The problem is trying to search through all of the brands to find the ball that is right for you. Here are a few tips to help you chose.
First, separate the balls into two price categories, value and performance. If you are new to the game or seem to lose golf balls easily, you probably don’t want to play with a performance ball. A value ball would save you some money and at the same time give you the performance you need. As you improve your consistency you can slowly move over to a performance golf ball, and this may cut a few strokes off your score.
Golf equipment manufacturers are doing a fantastic job in passing the latest technology onto golfers. For example, some manufacturers colour code their balls as the difference between balls now, is more than just compression. These different options result in different launch conditions, ball velocity, backspin and launch angles. So now you know why professional chose their brand carefully.
So what makes the golf balls play so differently? Most balls have a dimple pattern which governs the aerodynamics. A golf ball is a sphere and so to gain more distance we have to look at the amount of drag it experiences. The majority of drag comes from the separation of airflow flow behind the ball and this is known as Pressing Drag. So why do dimples make the ball go further? A thin layer of air clings to the surface of the ball at the front when the ball is in flight, the dimples cause the air to cling to the surface until it reaches the rear of the ball, when it finally breaks away. This creates a narrow stream of turbulence. When a ball is struck, it nearly always spins backwards. The dimples ensure that air moves over the top of the ball, faster than the air below and like an aircraft wing, experiences lift which keeps it in flight longer.
Although round dimples were accepted as the standard, a variety of other shapes were experimented with as well. Among these were squares, rectangles and hexagons. The hexagon shape result is a lower drag than the round dimples, for example. So if your looking for more distance off the Tee, look for a ball with hexagon dimples.
If your looking for more height on your drive you will need to create more backspin, the more dimples there are on the ball the higher the ball will fly. The hook and the slice can be explained in the same way, but to reduce your hooks and slices we need to reduce the spin of the ball, this can be done by finding a ball with fewer dimples on it. Each ball has between 300 and 500 dimples in one of 6 or more designs.
The cover thickness and stiffness will alter the velocity, backspin, and launch angle. Core stiffness is another parameter to fine tune the balls response. Even, the color! Why? Black balls are consider to absorb more heat and warm the air as it flows over the surface. Try one, you never know, especially in Murcia.
What makes a premium ball worth its price? Most of the premium balls have more than just a single core and single cover. One premium ball has a soft, thin urethane cover, a surlyn mantle and a polybutidiene rubber core. This combination allows high swing speed players to have optimum driver backspin without losing backspin on their short irons. For pitching, the soft and flexible urethane cover allows the player to put enough backspin on these shots to get the ball to check.
Looking for a ball to suit your game can take time, but reading the information on the box can help to make up your mind faster. Once you have found a ball you like, try to play with it all of the time, it will lower your scores."
|
| Author: Nick H Source: Club Murcia |
|
|
Learn How To Do A Proper Golf Ball Comparison To Improve Your Game |
If peak performance is what you are after then you need to learn how to do a proper golf ball comparison. Just like choosing the right golf clubs, picking the correct ball for you is just a matter of matching the different types of balls with your swing and how you play golf. Golf balls are all the same, aren't they? They may be small, but they are one of the most engineered pieces of golfing equipment.
Have you ever taken a really close look at a golf ball? They have different feels, different densities and different spins resulting in a different action, depending on how you play the game. To get the best out of your game and your golf ball, you need to match each section of the golf ball with your level of skill and style,
First off, you need to chose the correct golf ball compression. The compression is the measurement of how tightly wound the ball is. Depending on your swing speed, depends on how the compression comes into play. If you're swing speed is quite slow, then you will want a lower compression. Therefore, the faster the speed, the higher the golf ball compression that you will need.
In total, the compression ratings are broken down into three seperate groups.
The first group is the 80 compression golf balls. They tend to be the softest and produce what essentially results in a sling shot effect when they are hit. They fly farther after being hit but they are much harder to control and hit accurately. They are the most popular type of golf ball amongst women, senior and junior players for their distance alone.
The next group is the 90 compression rating golf balls. Due to their middle of the road standing, soft enough to provide good distance on a slower swing but hard enough to provide a good degree of control, these are a good match for most male players in a golf ball comparison. They also prove to be a great choice for the more advanced female players.
The final group is the 100 compression rating golf balls. Fast swing speeds are needed for top performance due to these being the hardest balls. These type of balls are most popular amongest the low handicap and scratch players due to the faster swing speeds and the higher level of control.
Of course the only real way for you to know which the best fit golf ball compression is for your game is to do your own golf ball comparison. So, why not take a few of each of the golf ball compressions out to the driving range and find out which ones work best for you.
|
| Author: Simon Ashton Source: Golf Equipment Instruction Guides |
|
|
Golf Balls That Match Your Skills |
Any golfer knows the role of the golf balls in their plays. No matter how good a golfer is, if he is without golf balls then his skills have no value. Every golfer knows these facts. This is why golf balls had become the primary commodities among golfers.
There is no general way to determine which golf ball is best for individual players. This factor is almost entirely dependent on the golfer's own preference, what he may do with the ball and how much will his pockets allow him.
For some, a single brand of golf ball says it all. They would stick to them for as long as they would want and most would never play if not playing with their particular brand of golf balls. Some people may call this insanity but this is an individual preference.
While a number of golfers may be practicing this, it is not thoroughly advisable to adopt this same attitude towards golf balls. The most ideal way of choosing balls is to use common sense, especially for beginning golfers.
A beginning golfer must never keep in mind what other people has to say about golf ball brands, may it be positive or negative. It must be pointed out that loosing balls for beginners is natural and this would mean that he need not focus yet on the quality or the brand name. What he needs is the low cost value the golf balls offer.
The best option for beginners is to buy golf balls sold in bulk, around 50 balls or so in a single bargain. These normally are balls that have been gathered from the greens and have been "recycled". What's good with these used balls is that they are commonly branded (but that doesn't matter actually) and one need not grieve for having lost any of such balls. On the average, losing a golf ball is around a hundred percent for most beginners through sessions of hit practicing.
With upgrades in the skills come the upgrades on the ball qualities. But this still don't suggest that intermediate players should rush to nearby golfing supplies and buy the most expensive balls from there. The golfer must not compromise price for his level of skill.
The golf balls he buys next will depend on his skill level. If he has great tendencies on failing on hits, he still needs to stay put with cheap balls. But this is not to the extent of using the same used balls. This time buy new inexpensive balls.
If for instance the golfer usually miss-hit the balls, then the balata-covered balls is nor the most appropriate ball to choose. Scratch players on the other hand would most likely prefer the golf balls that would offer lesser spin and more control.
As the basic theories for golfing, and most sports in that case explain, the skill improves with the frequency of playing. With improvements on the golfer's skills, he may result to trying new golf ball brands. Through this, he may determine what golf ball brands will suit him best. But this doesn't end here nor this factor decides what type of games the golfer may produce. He still have to reconsider other golfing components such as the golf clubs, the golf courses and other golfing accessories. |
| Author: Robert Thatcher |
|
Golf balls and lake balls delivered direct to your door. |
|
|
|
|
Everything you needed to know about golf balls |
Size of the ball
The "Rules of Golf" says that a golf ball's diameter must be a minimum of 1.680 inches / 42.67 mm. A smaller ball would fly much further than a larger ball. The reason for this is simple: with a smaller diameter the ball has less air resistance, or in other words, it displaces less air as it flies. Because of this, most manufacturers produce golf balls with the minimal diameter (1.680 inches / 42.67 mm).
Weight of the ball
A golf ball's weight must not exceed 1.620 oz./ 45.93 g according to the "Rules of Golf". The heavier the ball, the greater its momentum, and the less it would be slowed down by air resistance. Hence it would tend to fly further. For this reason most manufacturers produce golf balls with the heaviest sanctioned weight of 1.620 oz./ 45.93 g.
Compression Rates
In the manufacturing process, some two-piece, and all three-piece balls are rated by their compression measurements. This is done by pressuring them with a standard weight
Balls that don't deform at all are rated Compression 200, while balls that deform by 0.2" or above are rated Compression 0. These are the two extremes, and between them balls are rated in intervals of 0.001 inches. The Standard Compression rate is usually 90 or 100. the higher the compression rate the harder the feel, and vice versa. Almost every ball is subject to a compression rating. Compression rates of 80 and 100 are also found.
However, manufacturers are not bound by an official standard. Hence one manufacturer's compression rate of 100 can be different to another manufacturer's compression rate of 100. This can mount up to a 3.5 point difference in either direction. In addition, some balls don't even have the compression rate printed on them.
According to a host of surveys, low speed swing players are better off using balls with a Compression rate of 80. Players with an average speed swing should choose Compression 100, and Compression 110 is best for high swing speed players.
The weather should always be taken into consideration when deciding on compression rates to use. Low compression balls are best for colder weather, while high compression balls perform better in cold water.
Tips for choosing the right balls for you:
Considerations for Driving
Distance balls are designed to fly further and with more accuracy. This means you will be less likely to land in the rough, in a hazard, or out of bounds. Distance balls have their drawbacks, however, as they will be harder to stop on the green. Mid to high handicappers should favor a distance ball.
Optimum Performance in Your Approach
Spin balls are made with outer layers that take on more spin when you strike them with angled club faces. Drawing or fading around obstacles and hazards therefore becomes easier, as they will bend more to the left or right. They also take on more backspin when struck with a lofted club - this is important, as the balls will therefore stop more quickly on the green.
Whilst spin balls used to be made with fragile outer layers that were prone to damage, this problem has now been largely averted with the introduction of solid multilayer construction, replacing the old flimsy balata covers.
Getting More Control
Distance balls designed to stop quickly when on the green, but with minimum risk of slicing or hooking are known as control balls. The Nike One and Titleist Pro V1 are members of the new generation of balls that are so versatile they will perform in any situation.
Balls for Slow Swingers Known variously as Ladies or Senior balls, these balls increase driving distance to improve the scores of players with slower, less powerful swings.
Choosing the Right Putting Ball
Differently designed balls will roll for different distances on the green. As a rule of thumb, harder balls role further. The difference is more than you would think. Teaching professionals recommend that you putt with the same kind of ball all the time, as this will help you to calibrate, feel, learn and reproduce the connection between stroke strength and distance. As most balls aren't perfectly balanced, they won't roll absolutely true, but higher quality balls will be generally more likely to stay on course, due to higher standards of quality control during manufacture.
Affordability
Try to always play with the same balls that you practice with. So if you can't afford to practice with a high quality ball, don't switch when playing competitions. A ball that has been overused will no longer be spherical, and so is no good to you. Play balls that you can afford to replace regularly.
|
| Author: Frank J. Peter Source: www.LearnAboutGolf.com |
|
|
The Most Abused Rules of Golf |
1. Giving advice on the course:
You cannot ask what club a fellow-competitor or opponent used, or tell anyone how to execute a swing. You can ask your partner what club she used.
You cannot ask how far it is from your ball (but you can ask what the yardage is from a permanent marker that is public knowledge).
You cannot ask if your ball is playable if someone finds a lost ball for you (but you can ask for Rules of Golf information on what your options are for an unplayable lie).
2. Grounding a club in a hazard:
Before hitting a ball out of a bunker or water hazard, you are prohibited from touching the ground in the hazard with your club or hand, even when setting up to the ball. You may not touch or move any loose impediments (such as rocks or leaves), nor test the condition of the sand before hitting.
3. Where to play a ball which is in a water hazard:
You cannot drop a ball along the imaginary line known as the “line of flight.”
For a regular water hazard, marked with yellow stakes or lines, there are three options: 1)play the ball as it lies; or, under penalty of one stroke, 2)play another ball from where the original ball was struck into the hazard; or 3)drop behind the hazard, keeping the point where the ball last crossed the margin of the hazard between the hole and the spot on which the ball is dropped.
For a lateral water hazard, marked with red stakes or lines, there are five options, the first three are the same as for a regular hazard. The other two options are also under penalty of one stroke, 4)drop 2 club lengths from the point of entry into the hazard; or 5)drop 2 club lengths from point on the opposite margin, equidistant from the hole.
4. Improving your lie or position by moving growing things:
You cannot improve the position or lie of your ball, the area of your intended swing, or your line of play by moving or bending anything growing or fixed, or moving or pressing anything down with your club or foot, unless you are taking your stance or actually making a stroke.
5. Procedure for a lost ball:
If a ball is lost or out-of-bounds, the player MUST go back and hit again from the point where the last shot was played (one stroke penalty). If you lose your ball on your drive, you must return to the tee (and may re-tee the ball) to play your third shot, etc.
Golfers commonly look for a lost ball longer than the 5 minutes allowed. The time begins when the golfer or partner start looking for the ball.
6. Playing a provisional ball:
When a golfer hits a ball from the teeing ground and feels the ball may be lost or out-of-bounds, she should wait for all other players in the group to tee off, then hit her “provisional” ball. If the first ball is lost or out-of-bounds, the provisional ball will become the ball in play with one penalty stroke. In other words, the player lies three. If the first ball is found on the golf course, it remains the ball in play and the provisional ball MUST be picked up without any penalty. (Remember to always announce that the second ball you’re hitting is a provisional and use the word “provisional,” or the original ball is out of play and you are lying three.)
Any other time you hit a ball that may be lost or out-of-bounds, you MUST announce and play the “provisional” ball before going forward to search for the first ball. NEVER say “I am going back to hit a provisional ball.”
Be sure to clearly identify the two balls with different brands, numbers or marks to be sure which ball is first and which is second.
7. Taking relief from immovable obstructions:
If a player’s ball comes to rest on or close to an immovable obstruction such as a sprinkler head, road or cartpath, and the lie, stance or area of intended swing is interfered with by this obstruction, the player is allowed to drop a ball within one club length of the nearest point of relief, providing it’s no closer to the hole than where the ball originally had come to rest.
The player should determine the nearest point of relief using the club she expects to play her next stoke. Then she may use any club to measure the one club length area in which to drop the ball.
The nearest point of relief is the point where the ball will be played which is nearest to where the original ball lies, which is no closer to the hole and which, if the ball were so positioned, no interference would exist for the lie of the ball, the stance or the intended area of the swing.
8. What to do if your ball is unplayable:
When a ball comes to rest under a large bush, some golfers think they can measure the 2 club lengths from the edge of the bush. This is WRONG — the 2 club lengths MUST be measured from the ball’s position.
There are actually three options for a ball declared unplayable by a player: under penalty of one stroke, 1)play a ball from where the ball was originally played; 2)play a ball within 2 club lengths from where it lies in the unplayable position; or 3)keep the position where the ball lay unplayable between the hole and the spot on which the ball is dropped.
9. Touching the line of putt:
On the putting green, a player may not touch the line of putt other than to: 1)move loose impediments by picking them up or brushing them aside with a hand or club; 2)address the ball; or 3)to mark and lift the ball or remove movable obstructions. The player can repair old hole plugs or ball marks, but not spike marks. |
|
|
 |
| Total items in cart: 0 |
 |
 |
| Items in cart |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
